PDS_VERSION_ID          = PDS3
RECORD_TYPE             = STREAM
OBJECT                  = TEXT
  PUBLICATION_DATE      = 2003-03-31
  NOTE                  = "Errors or discrepancies identified on
    the Galileo Solid State Imaging Calibration CD-ROM (volume 
    GO_0001)"
END_OBJECT              = TEXT
END
 


       ERRORS AND/OR DISCREPANCIES ON GALILEO CALIBRATION CD-ROM

This document describes errors and discrepancies in specific calibration
files on this volume and volumes GO_0002 - GO_0006. 


CALRPT2.PDF
-----------

The file CALRPT2.PDF located in the DOCUMENT directory on this GO_0001
CD, is a scanned document in Adobe Acrobat PDF format.  This file is 
the "Solid State Imaging Subsystem Calibration Report: Part 2"  by 
K. Klaasen.  When this document was scanned into its digital form, 
for inclusion on this CD, the conversion software had some difficulties.  
The following provides all known inconsistencies with the original paper 
version of the document.

Please note that the figures and pictures seen on the screen when you 
first enter Adobe Acrobat Reader, are a low quality, quick-look version
provided only to identify where the pictures are located in the document.
Position your cursor over the image or figure and click the mouse button. 
Acrobat will automatically locate and display the high quality version of 
the image or figure.  Please do NOT do any interpretation from the quick-
look versions since they may contain scanner artifacts, some not so 
apparent to the untrained eye.

Throughout the digital version of this document, there were several
problems that the scanner software continually had difficulties with.  
First, the scanner software continually had difficulties interpreting
certain equations.  If you plan to use any of the equations in this
document, please be sure to check this document to ensure that the correct
equation is being used.  Please note that this document was typed using
Monoco 9 point font.  If the equations are not lining up properly, try 
changing your font to an equal-distant font such as Monoco or Courier.

Second, the unit NM (nanometer) was improperly translated as RIM.  When 
you see RIM in a figure caption, it should read NM. Since this is a very
common problem, all instances of it will not be included in the table 
below. Also note that the Angstrom sign was misinterpreted as a plain A.
Below are the other corrections that apply to this document.



Page                      Corrections
-------------------------------------------------------------------------
2    Figure 2-1 Wavelength is in NM (nanometers)

6    Figure 2-5 Wavelength is in NM (nanometers)

8    Figure 2-6 Wavelength is in NM (nanometers)

13   Figure 3-4 caption should read "The quantities of (DN-DC)/Lt
                                                                  c

14   3rd line down should read "should be a constant for any values of L
     and t , and the uncor-"
          c

29   Table 3-10  "Violet 1 (sum) 933.9"  should have a "*" after the 933.9
     indicating the xenon light cannon was used.

76   Figure 3-140  the units are in (Cycles/pixel)

97   The first line in Table 3-24 should read 
     Square  x     y    Y      x     y    Y
     -----------------------------------------
     5/7  .271  .298  1.0    .252   .246  1.0

100  Second equation on page should read

                           *
                      Xw(DN  - 255)
     R   = R      x 10
      w     w max

100  Third equation on page should read
                            *                  *                  *
                     Xwr(DNr  - 255)    Xwg(DNg  - 255)    Xwb(DNb - 255)
     R  = R      (10                )(10               )(10              )
      w    w max

                           *        *         *
                     XwrDNr + XwgDNg  + XwbDNb  -255 (Xwr+Xwg+Xwb)
        = R      (10                                               )
           w max

101  First set of equations on page should read
                      *        *         *
                XxrDNr + XxgDNg  + XxbDNb  - 255 (Xxr+Xxg+Xxb)
     X/X    = 10
        max

                      *        *         *
                XyrDNr + XygDNg  + XybDNb  - 255 (Xyr+Xyg+Xyb)
     Y/Y    = 10
        max


                      *        *         *
                XzrDNr + XzgDNg  + XzbDNb  - 255 (Xzr+Xzg+Xzb)
     Z/Z    = 10
        max

                                         *
101  Line 16 should read "... when all DN 's are zero."...

103  Equation starting with [L] =  should have a left opening bracket
     the same size as the right closing bracket, not just around the 
     the third line of the equation.

105  In table 3-26, under the Leakage Fraction column, the negative sign 
     after lines 3 and 6 should be part of the exponent, like the others in
     that column.     

106  In table 3-27, under the Equivalent Luminance column, the negative sign 
     after lines 3 and 6 should be part of the exponent, like the others in 
     that column.

108,110,111,113  The "A" in the caption should be an Angstrom symbol.