CLEMENTINE UVVIS 750-nm BASEMAP

Clementine UVVIS 750-nm Basemap

Information and Browser for CD Volume CL_3015


This CD is part of a 15 volume set that contains the "Clementine Basemap Mosaic" of Earth's Moon. The lunar basemap is a radiometrically and geometrically controlled, photometrically modeled global image mosaic compiled using more than 43,000 images from the 750 nanometer filter observations of the Ultraviolet / Visible camera onboard the Clementine Spacecraft. The basemap mosaic is mapped in the Sinusoidal Equal-Area projection at a resolution of 100 meters per pixel requiring approximately 10 gigabytes of digital storage. The basemap is partitioned into 14 geographic zones with each zone contained on a CD volume. Twelve zones, each 30 degrees wide in longitude and ranging from 70 degrees south to 70 degrees north, make up the mid-latitude regions (CD volumes 2-13). The two polar zones cover 360 degrees of longitude from 70 degrees latitude to the pole (CD volumes 1 and 14). A 15th volume contains reduced-resolution planetwide coverage at 0.5, 2.5, and 12.5 km/pixels. Backplane data files for emission, incidence, and phase angle values are also present on volume 15.

The geographic zones are further divided into "tiles". Each tile covers ~7 degrees of latitude with longitude coverage of ~6 degrees at the equatorial regions to larger longitude coverage at higher latitudes (longitude convergence at the poles allows more longitude coverage of each tile at the higher latitudes). Tiles are stored as image files of approximately 2100 pixels on a side. Pixels are 16-bit signed integers.

Browse the Image Collection on this CD
You can view browse versions (reduced resolution images) of the image files located on this CD by using one of the following graphics- or list-based interfaces.
Graphics-based
0.5km or 2.5 & 12.5km
List-based

The table shown below summarizes the contents of each CD volume and provides links to the browse versions (reduced resolution images) of the image files located on those volumes. The browse images are available with a graphics- or list-based interface.

CD Volume Browser Interface Latitude Range Longitude Range
cl_3001
Graphics-based
List-based
70°N to 90°N 0° to 360°
cl_3002
Graphics-based
List-based
70°S to 70°N 0° to 30°
cl_3003
Graphics-based
List-based
70°S to 70°N 30° to 60°
cl_3004
Graphics-based
List-based
70°S to 70°N 60° to 90°
cl_3005
Graphics-based
List-based
70°S to 70°N 90° to 120°
cl_3006
Graphics-based
List-based
70°S to 70°N 120° to 150°
cl_3007
Graphics-based
List-based
70°S to 70°N 150° to 180°
cl_3008
Graphics-based
List-based
70°S to 70°N 180° to 210°
cl_3009
Graphics-based
List-based
70°S to 70°N 210° to 240°
cl_3010
Graphics-based
List-based
70°S to 70°N 240° to 270°
cl_3011
Graphics-based
List-based
70°S to 70°N 270° to 300°
cl_3012
Graphics-based
List-based
70°S to 70°N 300° to 330°
cl_3013
Graphics-based
List-based
70°S to 70°N 330° to 360°
cl_3014
Graphics-based
List-based
90°S to 70°S 0° to 360°
* cl_3015 *
Graphics-based
0.5km or
2.5 & 12.5km
List-based
reduced resolution global coverage
* indicates current CD volume *

A detailed description of the Clementine Basemap Mosaic with information about the organization and compilation of the database is provided in the file: volinfo.htm. Please refer to this document for more information.

The Clementine Basemap Mosaic was compiled for the National Aeronautics and Space Administration (NASA) by the United States Geological Survey (USGS) under the direction of Dr. Alfred S. McEwen, Principal Investigator (now with the University of Arizona). Tammy Becker, Ella Lee, Kay Edwards (retired), and Dr. Mark Robinson (now with Northwestern University) comprised the USGS technical group responsible for its compilation. The Lunar Geometric Control network was derived by Mert Davies and Tim Colvin (both from the RAND Corporation). The design, layout, and production of the CDs were performed by Chris Isbell and Eric Eliason. Thanks to Kris Becker for the development of software tools for producing PDS compatible data sets. Also, an extended number of people have contributed to the production of the Clementine Basemap. A group photo was produced as a token of recognition of those involved.

The Clementine Basemap Mosaic can be obtained by contacting the Planetary Data System (PDS) Imaging Node. For more information contact Eric Eliason, U.S. Geological Survey, 2255 North Gemini Drive, Flagstaff, AZ 86001 [telephone: (520) 556-7113, e-mail: eeliason@usgs.gov].

The image files are organized according to NASA's PDS standards. An image file (tile) is organized as a PDS labeled file containing an "image object". Additionally, each image file is associated with an Integrated Software for Imaging Spectrometers (ISIS) "qube object" detached label. This detached label allows for images to be accessed and processed in the ISIS system (available through the USGS, Flagstaff, AZ). Several access tools are available that support the Clementine Basemap Mosaic. The program "NASAView" provides a simple display capability for images stored in the PDS format. This tool is available for distribution by the PDS (Jet Propulsion Laboratory, Pasadena, CA). Using NASAView as a web browser helper application is discussed in the "Image Display for Full Resolution Image Products" section below. Additionally, a software tool called "MapMaker" enables users to extract seamless mosaics of images for any latitude-longitude region and at a variety of scales in different map projections. MapMaker, available for distribution through the PDS Imaging Node, can output images in a variety of formats common to the user community (gif, jpeg, tiff, PDS)

Internet resources (only useful with internet link):


Image Display for Full Resolution Image Products

In addition to displaying reduced resolution 'browse' images, the graphics and list based interfaces provided above are also designed to allow for display of full resolution image products through the use of a web-browser helper application. The program NASAView can be used for this purpose. NASAView is a PDS product display tool that runs on multiple platforms with a common graphical user interface. See the PDS Home Page for more information on NASAView and it's availability (http://pds.jpl.nasa.gov/). Once NASAView is installed on your system, it can be incorporated with your web browser as a helper application. Refer to your particular web browser documentation for information on helper applications.

CD Volume and Directory Structure

The CD contents and directory structure are presented below. Directories (folders) are indicated by boldface type. Documentation and other ancillary support files may be viewed by selecting (clicking) the desired filename. Detailed documentation regarding the Clementine Basemap Mosaic are available in the aareadme (top level directory) and volinfo (document directory) files.


Top level CD directory:

NOTE: The 'aareadme.txt' file contains redundant information to this page. The file exists so that the information about the Clementine Basemap Mosaic can be conveyed without the benefit of an HTML browser.

The following directories contain individual Clementine DIM data products (tiles):

browse directory: The browse directory also contains directories for browse images for each volume of this CD set. Browse images within these directories ( CL_3001 through CL_3014) can be accessed via the links provided in the introductory section of this HTML document.

document directory: NOTE: To maximize readability of the 'Volinfo' document, several formatted versions of this document is available on this CD. The 'volinfo.txt' file may be missing figures that can not be portrayed in an ASCII text document.

catalog directory:

index directory: